Selecting and activating adaptive cruise control*1

Adaptive cruise control (ACC2) must first be selected and then activated to enable it to control speed and distance.
P5-1507-Adaptive Cruise Control, setting cruise control in standby mode
To start the function requires the following:
  • The driver's seatbelt must be buckled and the driver's door must be closed.
  • There must be a vehicle (the "target vehicle") within reasonable distance in front of the car, or the current speed must be at least 15 km/h (9 mph).
  • For cars with manual gearbox. Speed must be at the lowest 30 km/h (20 mph).
Press the steering wheel button ◀ (2) or ▶ (3) to scroll to the adaptive cruise control symbol P5-1507-Cruise Control symbol in text 2 (4).
The symbol is grey – the adaptive cruise control is in standby mode.
When speed limiter is selected – press the steering wheel button P5-1507-Cruise Control, speed limiter, activates speed limiter and stores current speed symbol 5x3,5 (1) to activate.
The symbol is white – the speed limiter is started and the current speed is stored as maximum speed.

Reactivating adaptive cruise control to the last stored speed

When the adaptive cruise control is selected – press the steering wheel button P5-1507-Cruise control, speed limiter, activates speed limiter from standby mode symbol 5x3,5 to activate.
The cruise control markings and symbols in the driver display change colour from GREY to WHITE — the car will now follow the most recently stored speed again.

 Warning

A significant increase in speed may follow when the speed is resumed with the P5-1507-Cruise control, speed limiter, activates speed limiter from standby mode symbol 5x3,5 steering wheel button.
  1. * Option/accessory.
  2. 1 This function can be either standard or optional, depending on market.
  3. 2 Adaptive Cruise Control