Park assist camera - settings
Parking camera is an auxiliary system, which is activated when the reverse gear is selected.
Activate switched-off camera
The camera starts automatically when reverse gear is selected, but it can also be activated manually as follows:
- Press CAM - the screen shows the current camera view.
Change setting
The settings for the parking camera can be changed when the screen shows a camera view:
- Press OK/MENU when a camera view is shown - the screenchanges to a menu with various options.
- Turn to reach the desired option with TUNE.
- Highlight the option by pressing OK/MENU once and go back out with EXIT.
Towbar
The camera can be used to advantage when hitching a trailer. A park assist line for the towbar's intended "trajectory" toward the trailer can be shown on the screen - exactly as for the "wheel tracks".
A choice can be made between showing the "wheel tracks" or the towbar's trajectory - both options cannot be shown simultaneously.
- Press OK/MENU when a camera view is shown.
- Turn to reach the Tow bar trajectory guide line option with TUNE.
- Highlight the option by pressing OK/MENU once and go back out with EXIT.
Zoom
If precise manoeuvring is required then the camera view can be zoomed in:
- Press CAM or turn TUNE - repeated press/turn changes back to the normal view.
If more options are available, they are in a loop - press/turn until the desired camera view is shown.