Fitting and removing the safety net*
The safety net is fitted into four mounting points.
![P5-1846-V60-Safety net overview](https://www.volvocars.com/images/support/img9cf713da437350adc0a801527ecd5acc_2_--_--_VOICEpnghigh.png?imwidth=1280)
For reasons of safety, the safety net must always be fastened and anchored as described below.
The net is made of a strong nylon fabric and can be secured two different locations in the car:
- Rear fitting - behind the rear seat.
- Front fitting - behind the front seats.
Warning
Fitting the safety net
Warning
Check that the safety net's upper mountings are correctly fitted and that the puller-straps are securely hooked on.
Damaged safety nets must not be used.
Note
Hook the net's second attachment hook to the roof bracket on the opposite side.
The telescopically sprung attachment hooks make it easier to fit.
Take care to press forward the net's retaining hooks for each respective roof mounting's front end position.
![P5-1846-V60-Safety net rear installation](https://www.volvocars.com/images/support/img54d240335d17b5bec0a80152645b2c8a_2_--_--_VOICEpnghigh.png?imwidth=1280)
For rear fitting:
With the net fitted in the rear roof mountings, hook the safety net's puller-straps into the front load retaining eyelets in the cargo area.
![P5-1846-V60-Safety net front installation](https://www.volvocars.com/images/support/img0c0188fb5d1799d9c0a801527cd20c76_3_--_--_VOICEpnghigh.png?imwidth=1280)
For front fitting:
With the net fitted in the front roof mountings, hook the puller-straps into the outer eyes on the rear of all seat slide rails. The procedure is facilitated if the backrests are straightened and the seats are moved forward slightly.
Pay attention to make sure that you do not exert hard pressure on the net when the seat and backrest are moved back again. Only adjust until the seat or backrest makes contact with the net.