Exterior lighting
When the car is started, the following functions are available for the rotating ring's different positions:
| Position | Specification |
|---|---|
 | Daytime running lights. Main beam flash can be used. |
 | Daytime running lights and position lamps. Position lamps when the car is parked.1 Main beam flash can be used. |
 | Dipped beam and position lamps. Main beam can be activated. Main beam flash can be used. |
 | Front daytime running lights and rear position lamps in daylight. Dipped beam and position lamps in weak daylight or darkness, or when the front fog lamp* and/or rear fog lamp are activated. The Active main beam function can be activated. Main beam can be activated when dipped beam is switched on. Main beam flash can be used. |
 | Active main beam on/off. |
Volvo recommends that 
mode is used when the vehicle is driven.
Warning
The car's lighting system is not able to determine when daylight is too weak or sufficiently strong, e.g. in fog and rain, in all situations.
The driver is always responsible for ensuring that the car is driven with a beam pattern suitable for the traffic situation and in accordance with applicable traffic regulations.
Exterior and interior lighting
You can adjust the exterior and interior lighting in the centre display.