Updating the software ensures it stays up to date with the latest features and improvements. Software updates are primarily done over the air (OTA) and all previous updates are included when you install one.
When a new update is available, you’ll get a notification in the centre display and in the Volvo Cars app about three weeks after the release date. The notification will also show the estimated time for installation and what’s included in the update.
All updates are available for installation from the release date at your Volvo dealer or an authorised Volvo workshop. Keep in mind, that you may be charged for the installation unless it’s included in a repair or service agreement.
If an update isn’t available over the air you don’t have to schedule an appointment but can just wait until the next over-the-air update is available.
Features and functionality after updating may vary depending on market, model, model year and options. If an update isn’t available in your car, you already have the latest version.
You can use the car after updating but to ensure that new or updated features work properly, lock the car and leave it for 30 minutes. Avoid charging during this time.
Updates in software 1.5.1
Software release date: 13 December 2024
Note
- Introduction to the US market.
- General stability improvements.
Updates in software 1.5
Software release date: 9 December 2024
Note
The button for disabling speed limit warnings is moved from the Welcome view to the customisable button on the left-hand side of the steering wheel.
If the car detects that the driver is drowsy or unresponsive or if you let go of the steering wheel, the car will automatically come to a safe stop in the lane when you’re driving with Pilot Assist.
Alerts about traffic crossing behind the car (RCTA) now have an on and off switch in the parking view.
Improvements to battery:
While charging, the battery level is shown in both kW and as a percentage.
Added a snowflake icon for when battery temperature goes below 0 °C (32 °F).
Additional colours are added for low battery levels. This helps you get a quick indication of the battery’s remaining charge.
You can see the battery’s health in the Car status screen.
The subwoofer now has a separate toggle in the settings for turning it on and off.
If you have a towbar installed you’ll be able to see a centre line in the parking view that helps you align the towbar with the trailer.
When the rear wipers are turned on you’ll now be able to see a symbol in the driver information area of the display.
The heating in the steering wheel and the seats is automatically turned on during preconditioning if the outside temperature is below 7 °C (44 °F) and if you activate preconditioning using the timer. You can read more about preconditioning and how to activate it in the user manual..
If you use a key card to start the car, you can now just swipe it across the card reader in the tunnel console rather than keeping there during the entire drive. You have to start the car within 60 seconds of swiping the key card or you’ll have to swipe again.
- Improvements to the central lock confirmation sound.
- Bug fixes that do not affect performance or other certified properties.
Updates in software 1.4.4
Software release date: 21 October 2024. You will be notified when you can install this software update, normally about 3 weeks after the software release date. If you've already installed 1.4.2 or 1.4.3, you're covered and won't get 1.4.4 over the air.
- Seat belt reminder and road sign information improvements.
Updates in software 1.4.3
Software release date: 30 September 2024. This update is only available in workshops and not over the air (OTA).
Note
- Improvements and bug fixes.
Updates in software 1.4.2
Software release date: 30 August 2024. This update is only available in workshops and not over the air (OTA).
Note
Apple CarPlay
Apple CarPlay is now available. You can use it to connect your iPhone to your car wirelessly and access iPhone apps via the main area of the display in the car.
To start using it, you need connect your iPhone to your car via Bluetooth and then activate Apple CarPlay either through your iPhone or by opening the CarPlay app.
- If you’ve already connected your iPhone to the car you need to remove it first. You can do this on the Bluetooth settings page.
- Open the app library in the car by pressing the app symbol at the bottom of the display.
- Open the CarPlay app. You’ll be prompted to add a Bluetooth device – accept this to be directed to the Bluetooth settings.
- Press “Add another device” and open the Bluetooth settings on your iPhone. Then follow the instructions in the display and on the iPhone screen.
- Once your iPhone is connected, Apple CarPlay will be available on the home screen.
You can prevent CarPlay from starting automatically by going to Bluetooth settings, then phone settings and then disconnecting the CarPlay app.
When CarPlay is active you can interact with Siri by pressing and holding the voice control button on the steering wheel for a few seconds. You can read more about Apple CarPlay in the User manual.
Welcome View
The new Welcome View will greet you when you enter the car. It gives you quick access to some of the most common personalisation settings, like adjusting mirrors or the exterior lights, driving settings like One pedal drive and Lane keeping aid and more.
To close the Welcome view, just put the car in gear or press the home button in the bottom left.
Adapt to speed limit
This feature will automatically adjust the speed limit to match the road speed limit when you’re using Pilot Assist or Adaptive Cruise Control. You can activate it in the Driving settings menu.
Other improvements:
- Improved Radio reception – We’ve also improved the reception for both DAB and FM radio.
- Road Sign Information – improved performance.
- Waze (third party app) – blocking issue while driving is now solved.
- Bug fixes that do not affect performance or other certified properties.
Updates in software 1.4
Software release date: 19 June 2024. You will be notified when you can install this software update, normally within 3 weeks of the software release date.
More Key tags
- You can now add more than one key tag to a car, making it easier to share access with friends and family.
System Quick Controls
- We’ve added quick access to System Quick Controls. Just press the top-right corner of the display, near the navigation, Wi-Fi and connectivity icons. This will allow you to quickly manage settings like your Bluetooth devices and adjusting the brightness of the display.
Other improvements:
- You can now lock and unlock the glove box with a password.
- The air conditioning system now accounts for sunlight when you set a specific temperature.
- The charging cable now disconnects more smoothly when you unlock your car.
- Improved efficiency when charging at temperatures below -20°C.
- Improvements to Car wash mode.
- Updates to Driver Alert functionality and to features in Quick controls.
- Bug fixes that do not affect performance or other certified properties.
Updates in software 1.3.1
Software release date: 30 Apr 2024. You will be notified when you can install this software update, normally within 3 weeks of the software release date.
Improvements and bug fixes
- Bug fixes that do not affect performance or other certified properties.
Updates in software 1.3
Software release date: 15 Apr 2024. You will be notified when you can install this software update, normally within 3 weeks of the software release date.
Car wash mode
You can now activate car wash mode in the Settings menu. Go to Controls, Car modes and Car wash mode to activate it. It deactivates automatically if the car is moving faster than 20 km/h (12 mph). However, to ensure that all car features are available to you, it's recommended to deactivate car wash mode manually before you reach a public road.
Car wash mode helps you get ready for using an automatic car wash by closing the windows, turning the wipers off, folding the wing mirrors in and activating air recirculation.
Improvements and bug fixes
- If you’ve set a maximum current limit for charging, the car will now remember this between driving cycles.
- The rear view of the parking camera now has more natural colours.
- Improvements to the radio, including better reception.
- Several bug fixes that do not affect performance or other certified properties.
Updates in software 1.2.1
Software release date: 2024-02-09. The software will be available through OTA within two to three weeks after the software release date.
- You can write and send text messages using voice control via the digital assistant1. If you receive a text message, a notification will appear in the display.
- The accuracy of the estimated battery level upon arrival to a selected navigation destination has been improved.
- An issue which says that type 2 connectors are not compatible with your EX30 when searching for charging stations in Google Maps has been solved.
- The software release notes are available in the car after installing this update. They’re also available in the Volvo EX30 app and on the Volvo Cars support website.
- In cars equipped with the QuantumLogic surround sound system, the default setting for QuantumLogic surround is now Off instead of Medium. The selected level is saved for your active profile.
- Bug fixes and general improvements.