The available settings are:
| On | The function is on. You can brake by releasing the accelerator. |
| Auto | One pedal drive is enabled, but releasing the accelerator only applies braking force when you are close to a vehicle in front of you. |
| Off | The function is off. Releasing the accelerator does not engage the brakes. |
Tip
Quick access
A button for adjusting One pedal drive is also available in quick controls in the centre display when you drive. This allows you to quickly turn adjust One pedal drive without going into settings.
Automatic creeping
By turning One pedal drive off, you also enable automatic creeping. This means that your car can move slowly without you using the accelerator.
When automatic creeping is active you can temporarily pause it by pressing down hard on the brake pedal until your car is stopped. This activates the hold feature. If you want to initiate creeping again, simply tap the accelerator.
Warning
There is a limit to the braking force that can be applied by releasing the accelerator when using One pedal drive. For hard braking you need to use the brake pedal.
Press the car symbol 
in the bottom bar and go to Settings.
in the bottom bar and go to Settings.Go to .
Select a One pedal drive setting.