When in gear D or R and the car comes to a full stop, auto hold will automatically activate if the necessary conditions are met.
To exit auto hold and continue driving in the selected gear, press the accelerator.
Note
Transitioning from auto hold to parked
Your car will transition to P if auto hold is active for several minutes, if you unbuckle your seatbelt or if you open the driver door.
Auto hold conditions
Auto hold is available when you are in gear D or R. You must also have your seatbelt buckled and the driver door closed.
Auto hold is disabled when you are not using One pedal drive. By disabling One pedal drive you enable automatic creeping. You must then manually activate the hold function to keep your car stationary.
Manually activating hold
By pressing down hard on the brake pedal, you activate the hold function.1 This is indicated in the driver display with the hold symbol.
