Replacing front wiper blades

Your front wiper blades' service life is affected by the water, dirt and debris that they sweep off your windscreen. The wiper blades need to be replaced when they show signs of wear.
Activate the wiper service position via settings in the centre display.
Folding the wipers up from the windscreen

Fold the wipers up and away from the windscreen.

Pulling the lower half of the wiper blade upwards so that the blade is horizontal

Carefully pull the lower half of the wiper blade upwards until the blade is horizontal.

Removing the wiper blade from the wiper arm

Remove the wiper blade from the wiper arm.

Sliding the new blade into the wiper arm

Make sure that the blade for the driver side is longer than the blade for the passenger side. Whilst keeping the wiper blade horizontal, slide the wiper blade onto the wiper arm. Ensure that the pin on the wiper arm goes into the hole on the wiper blade.

Grasp the lower part of the wiper blade and move it back down so that the blade is vertical. Push the blade into the wiper arm until you hear a click sound.
Check that the blade is firmly attached.
Fold the wiper arms back down against the windscreen.
Deactivate the wiper service position.