Fitting and removing cargo cover*
In the extended position, the cargo cover prevents visual access to the cargo area.
Fitting cargo cover
Insert one of the cargo cover's end pieces in the recess in the side panel in the cargo area.
Then insert the other end piece in the recess in the side panel on the opposite side.
Press down the end pieces on both sides - one by one.
When a "click" is heard and the red marking on each end piece has disappeared, the cargo cover is attached - check that it is affixed securely.
Fold the cargo cover's front panel forward to eliminate the space between the cargo cover and the rear seat's backrests.
Important
The cover plate has two plastic parts that act as support to hold it in place.
The plastic parts must not be used to hang bags on. They are not designed for this purpose and may break.
If the safety net* shall be used at the same time as the cargo cover then the safety net must be fitted first.
Removing cargo cover
In retracted position:
Depress the button on one of the retracted cargo cover's end pieces and lift out that end.
Angle the cover up/out carefully.
The other end piece loosens automatically and the cover can be lifted out of the cargo area.