Fitting and removing the towing eye
Use the towing eye for towing. The towing eye is screwed into a threaded socket behind a cover on the right-hand side of the bumper, front or rear.
Note
Fitting the towing eye
![P5-1617-V90-towing eye storage step 1](https://www.volvocars.com/images/support/img9c98849d8ce43b0ec0a801526b8b7a43_1_--_--_VOICEpnghigh.png?imwidth=1280)
![P5-Icon gray box 1](https://www.volvocars.com/images/support/imgc457d9ab665e93b5c0a801524f9fdc84_1_--_--_VOICEpnghigh.png?imwidth=1280)
Take out the towing eye from the foam block under the floor in the cargo area.
![P5-1617-S90-V90-towing eye fitting at front step 2](https://www.volvocars.com/images/support/img853c38d28cf6d2d5c0a80152686bb440_1_--_--_VOICEpnghigh.png?imwidth=1280)
![P5-Icon gray box 2](https://www.volvocars.com/images/support/img788513ba665e4b01c0a801521b297a3f_1_--_--_VOICEpnghigh.png?imwidth=1280)
Front: Remove the cover - press on the marking with a finger.
![P5-1646-S90-V90-towing eye rear step 3](https://www.volvocars.com/images/support/img21f23c81991527cfc0a8015216d6efa3_1_--_--_VOICEpnghigh.png?imwidth=1280)
![P5-Icon gray box 3](https://www.volvocars.com/images/support/img7f12be10665e0337c0a8015243da4a10_1_--_--_VOICEpnghigh.png?imwidth=1280)
Rear: Remove the cover - press on the marking with a finger and, at the same time, fold out the opposite side/corner using a coin or similar.
Screw the towing eye right in until it stops. Screw the eye in firmly. For example, thread through the wheel bolt wrench* and use it as a lever.
![P6-1746-XC40-Towing eye with wheel bolt wrench as lever](https://www.volvocars.com/images/support/imga60121c467f6415dc0a80152029099eb_1_--_--_VOICEpnghigh.png?imwidth=1280)
Important
After use, unscrew the towing eye and return it to its place.
Finish by refitting the cover onto the bumper.
The towing eye may be used to pull the car up onto a recovery vehicle with a flatbed platform. The car's position and ground clearance determine whether it is possible.
If the slope of the recovery vehicle's ramp is too steep, or if the ground clearance under the car is inadequate, then the car may be damaged if you try to pull it up using the towing eye.
If necessary, raise the car by using the recovery vehicle's lifting device. Do not use the towing eye.