Charging status in the car's driver display
Charging status is indicated in the driver display. Both current and set amperage for charging are shown in the driver display when charging with alternating current. Note that both current and set amperage apply per phase from the alternating current power source.
| Colour | Status | Specification |
|---|---|---|
| Flashing green | The frame of the driver display is shown with a green pulsing light. | Charging continues and an approximate time for when the high voltage battery is estimated to be fully charged is shown. |
| Green | The frame of the driver display is shown with a fixed green light. | The high voltage battery is fully charged. |
| Red | The frame of the driver display is shown with a red pulsing light. | A fault has occurred, check the connection of the charging cable to the car's charging input socket and to the 230 V socket1 (alternating current). |
| Blue | The frame of the driver display is shown with a blue pulsing light. | Scheduled Charging activated. |
| Yellow | The frame of the driver display is shown with an amber pulsing light. | Charging is waiting to start or paused charging. |
Note
If the driver display is not used for a while then it is dimmed. Reactivate the display by means of one of the following:
- depress the brake pedal
- open one of the doors
- press one of the steering wheel buttons.