Replacing the rear fog lamp bulb
The rear foglight is fitted in the rear bumper on the driver's side.
- 1.Loosen the foglight unit on the driver's side by inserting a flat object, such as a table knife or a screwdriver, on the bulb kit's narrower short side of the keypad and then prize the foglight unit out.
- 2.Unplug the connector.
- 3. Undo the bulb holder by turning it anticlockwise and pulling it out.
- 4.Remove the bulb by pressing it in and turning anticlockwise.
- 5.Fit a new bulb by pressing it in and turning it clockwise.
- 6.Attach the bulb holder by turning it clockwise.
- 7.Plug in the connector.
- 8.Insert the hook on the wide part of the foglight unit in the rear bumper and rotate the unit inwards so that the clips engage.