Selecting ignition mode

The car's electrical system can be set in different levels/positions and in this way make the different functions available.

Selecting ignition position

P5-22w22-Start/stop switch
Start knob in the tunnel console.
  • Ignition position 0 – Unlock the car and store the key inside the car.

 Note

To reach level I or II without starting the engine – do not depress the brake pedal when these ignition positions are to be selected.
  • Ignition position I – Turn the start knob clockwise and release it. The control automatically returns to its starting position.
  • Ignition position II – Turn the start knob clockwise and hold it in position for approx. 5 seconds. Then release the knob, which automatically returns to its starting position.
  • Back to ignition position 0 – To return to ignition position 0 from position I and II – Turn the start knob clockwise and release. The control automatically returns to its starting position.