Selecting ignition mode
The car's electrical system can be set in different levels/positions and in this way make the different functions available.
Selecting ignition position
![P5-21w22-Start/stop switch](https://www.volvocars.com/images/support/imgf6b84e2b04115720c0a80152345ac188_1_--_--_VOICEpnghigh.png?imwidth=1280)
- Ignition position 0 – Unlock the car and store the key inside the car.
Note
To reach level I or II without starting the engine – do not depress the brake pedal when these ignition positions are to be selected.
- Ignition position I – Turn the start knob clockwise and release it. The control automatically returns to its starting position.
- Ignition position II – Turn the start knob clockwise and hold it in position for approx. 5 seconds. Then release the knob, which automatically returns to its starting position.
- Back to ignition position 0 – To return to ignition position 0 from position I and II – Turn the start knob clockwise and release. The control automatically returns to its starting position.