Full-cover position
Grip the handle and pull the cargo cover out to the end position.
Hook the attachment pins into the recesses at the cargo area's rear pillars.
The cargo cover is locked in the full-cover position.
Important
Do not load objects on top of the cargo cover.
Loading mode
From the full-cover position:
Press the cargo cover's handle section upwards slightly.
The cover goes up until it stops in the loading position.
Returning to full-cover position from loading position:
Grip the handle and pull the cargo cover down to the end position. To facilitate, angle up the handle slightly so that the attachment pins pass the stops.
Release the handle so that the attachment pins engage.
The cover is locked in the full-cover position.
Important
The cargo cover may obscure the view to the rear when in the loading position. Make sure the cargo cover is fully extended or fully retracted when driving.
Retracting
From the full-cover position:
Lift up the handle and pull it backward to disengage the cargo cover's attachment pins and then release.
From loading position:
Grip the handle and pull out the cargo cover in the grooves - pull to the full-cover position. Lift up the handle and pull it backward to disengage the attachment pins and then release.
Retract the cover with its attachment pins outside of the side panels until it stops in the retracted position.