Using a stored setting
A stored setting can be used with the front door either open or closed:
Open front door
Depress one of the memory buttons 1 (
) or 2 (
) with a short press. Power seat, door mirrors and head-up display move and then stop at the positions stored in the selected memory button.
) or 2 () with a short press. Power seat, door mirrors and head-up display move and then stop at the positions stored in the selected memory button.Closed front door
Hold one of the memory buttons 1 () or 2 () depressed until seat, door mirrors and head-up display stop in the positions that are stored in the selected memory button.
) or 2 () depressed until seat, door mirrors and head-up display stop in the positions that are stored in the selected memory button.If the memory button is released, the movement of the seat, door mirrors and head-up display will be stopped.
Warning
- Because the driver's seat can be adjusted with the ignition off, children should never be left unattended in the vehicle.
- Movement of the seat can be STOPPED at any time by pressing any button on the power seat control panel.
- Do not adjust the seat while driving.
- Make sure there is nothing under the seats when they are being adjusted.
Note
All driver profiles need to be set in Protect Profile mode in order for the stored positions to work.