When lane keeping aid is enabled, the car can alert you if you are about to drift out of your lane and it can ask you to steer the car with attention. It can also perform steering interventions. Lane keeping aid relies on the car's forward-facing camera to identify road markings and your position in the lane.
Warning
Main conditions for lane keeping aid
- Your speed must be in the range 65-200 km/h (40-125 mph).
- The lane markings must be clearly visible for the car's camera to see.
- The lane must be wide enough. A very narrow lane does not provide enough margin between the car and the road markings.
- You must keep your hands on the steering wheel and actively steer the car.
Important
Steering actively
Never let go of the steering wheel when driving. Do not dismiss the car's requests for you to steer actively and keep your attention on the road.
Lane keeping aid intervention types
Steering intervention | The car tries to steer back into the lane. |
Lane departure warning | The car alerts you using steering wheel vibrations. |
Note
Indicating a turn or lane change
As long as you use the direction indicators when changing lanes, the car assumes it's an intentional manoeuvre.
Cutting a corner
Lane keeping aid may allow you to briefly cut across the line at sharp corners.
Hands on the wheel
Lane keeping aid requires you to keep your hands on the steering wheel. This is continuously monitored by the car. If the car detects that your hands are not on the steering wheel for a prolonged duration of time, it may notify you with a sound along with a message in the driver display.
Safety interventions are always enabled
Some situations can cause a steering intervention to prevent a dangerous lane departure even if lane keeping aid is turned off in settings.
Display symbols and communication
Lane keeping aid warnings and interventions are communicated in the driver display.
This symbol appears if you are coming too close to the lane markings. | |
Lane keeping aid is active and the lane markings are visible to the car. | |
Lane keeping aid is enabled in settings but temporarily unavailable as the car cannot detect any lane markings. |
Road markings conditions and limitations
For lane keeping aid to work, road markings must be present and visible. The car identifies them using a forward-facing camera. This form of detection requires that the camera view is unobstructed and that the conditions for visual detection are present. Read the separate section about the conditions and limitations of your car's cameras to understand how features relying on camera detection are affected.
- Lane divisions and mergers can cause temporary misidentification of the lane.
- Non-standard or unusual road marking layouts might not be identified correctly by the car. For example, road work or traffic diversions can result in conflicting or multiple sets of road markings.
- The car may be unable to detect deteriorated road markings, for example if they are worn, misshapen or discoloured.
- Other edges or lines can be misidentified as road markings, such as kerbs, road surface repair edges, barriers or well-defined shadows.
- Road markings must be sufficiently illuminated to be detected. In low-light conditions, they need to be illuminated by the car or street lights.