Managing speed for the cruise control

Cruise control (CC1) can be set to different speeds.

Setting/changing the stored speed

P5-1507-CC rattknappar-1
NOTE: The illustration is schematic - details may vary depending on car model and market.
Change a set speed with short presses on the steering wheel buttons P5-1507-Symbol 5x3,5-CC rattknapp + (1) or Px-1717-Symbol 5x3,5-Rattknapp – (minus) (3) or by pressing and holding them.
  • Short presses: Each press changes the speed in increments of +/- 5 km/h (+/- 5 mph).
  • Press and hold: Release the button when the set speed indicator (4) has moved to the desired speed.
  • The speed set after the last button press is stored in the memory.

If the driver increases the car's speed using the accelerator pedal before pressing the steering wheel button P5-1507-Symbol 5x3,5-CC rattknapp + (1), the speed stored will be the car's speed when the button is depressed, provided the driver's foot is on the accelerator pedal at the moment when the button is depressed.

A temporary increase in speed with the accelerator pedal, e.g. during overtaking, does not affect the setting - the car returns to the last stored speed when the accelerator pedal is released.

Using engine braking instead of the foot brake

With Cruise Control, speed is regulated with less frequent application of the foot brake. On a downhill gradient it may sometimes be desirable to start moving a little faster and limit the acceleration by engine braking. In this case the driver can temporarily disable foot brake application by Cruise Control.

To do so, proceed as follows:
Depress the accelerator pedal about halfway down and release.
Cruise Control will disengage its automatic foot braking and then uses engine braking only.

Cruise control dependence on drive mode

The cruise control's way of maintaining a speed may vary depending on the selected drive mode2.

Eco Cruise cruise control with ECO drive mode

In ECO drive mode the cruise control's accelerations and decelerations become smoother compared to other drive modes to optimise fuel and environmental economy. This can cause the car's speed to be temporarily above or below the set speed.

See supplementary information in "ECO drive mode" under "Cruise control Eco Cruise".

Cruise control Dynamic Cruise

In Dynamic drive mode, the cruise control's accelerations and decelerations are felt more strongly and seem more direct compared to other modes.

  1. 1 Cruise Control
  2. 2 See supplementary information in the section "Drive modes".