Automatic gearbox - Geartronic*
![P4-1320-Växellägen Automat](https://www.volvocars.com/images/support/img098fc20126cf27edc0a801e701637956_1_--_--_VOICEpnghigh.png?imwidth=1280)
The combined instrument panel shows the position of the gear selector using the following indications: P, R, N, D, S*, 1, 2, 3 etc.
Gear positions
![P4-1220-Automatiska växellägen](https://www.volvocars.com/images/support/imgd2879de1a7e936e7c0a801e7014bb01f_1_--_--_VOICEpnghigh.png?imwidth=1280)
Automatic gear positions are indicated on the right of the combined instrument panel. (Only one marker is illuminated at a time - the one showing the current gear selector position.)
Symbol "S" for Sport mode is ORANGE when the mode is active.
P – Parking position
Select P when starting the engine or when the car is parked.
To be able to move the gear selector from the P position, the brake pedal must be depressed and the key position must be II.
The gearbox is mechanically blocked when the P position is engaged. Also apply the parking brake when the car is parked, see Parking brake.
Note
Important
Warning
R – Reverse
The car must be stationary when position R is selected.
N – Neutral
No gear is engaged and the engine can be started. Apply the parking brake if the car is stationary with the gear selector in position N.
In order to be able to move the gear selector from the N position to another gear position, the brake pedal must be depressed and the key position must be II.
D – Drive
D is the normal driving position. Shifting up and down takes place automatically based on the level of acceleration and speed. The car must be stationary when the gear selector is moved to position D from position R.
Geartronic – Manual gear positions (+/-)
The driver can also change gear manually using the Geartronic automatic gearbox. The car engine-brakes when the accelerator pedal is released.
The manual gear position is reached by moving the lever to the side from position D to the end position at "+/-". The combined instrument panel's symbol "+/-" changes colour from WHITE to ORANGE and the digits 1, 2, 3 etc. are displayed in a box which corresponds to the gear that has just been selected.
- Move the lever forwards towards + (plus) to change up a gear and release the lever, which returns to its neutral position between "+" and "–".
or
- Pull the lever back towards "–" (minus) to change down a gear and release it.
The manual gearshift mode "+/-" can be selected at any time while driving.
Geartronic automatically shifts down if the driver allows the speed to decrease lower than a level suitable for the selected gear, in order to avoid jerking and stalling.
To return to automatic driving mode:
- Move the lever to the side to the end position at D.
Note
Paddles*
As a supplement to manual gear changing with the gear selector there are also controls located on the steering wheel, so-called "paddles".
To be able to change gear with the steering wheel paddles they must first be activated. This is by means of pulling one of the paddles toward the steering wheel - the combined instrument panel then changes indication from "D" to a figure, which indicates the current gear.
To then change gear one step:
- Pull one of the paddles backwards - towards the steering wheel - and release.
![P3-1320- RattPaddlar](https://www.volvocars.com/images/support/img0757287b781ba7f8c0a801e7011f7957_1_--_--_VOICEpnghigh.png?imwidth=1280)
"-": Selects the next lower gear.
"+": Selects the next higher gear.
A gear change occurs at each pull of the paddle provided that the engine speed does not leave the permitted range.
After each gear change the combined instrument panel changes figure to show the current gear.
Note
Automatic deactivation
If the steering wheel paddles are not used then they are deactivated after a short time - this is indicated when the combined instrument panel switches indication, from the figure for the current gear back to "D".
The exception is during engine braking - then the paddles are activated as long as engine braking is in progress.
Manual deactivation
The steering wheel paddle shifters can also be deactivated manually:
- Pull both paddles toward the steering wheel and hold until the combined instrument panel changes character from the figure for the current gear to "D".
The paddles can also be used with the gear selector in Sport mode* - then the paddles are constantly activated without being deactivated.
Geartronic - Sport mode (S)
![P4-1320-Symbol Gearbox Sportläge](https://www.volvocars.com/images/support/img77eed90426e16ef1c0a801e7001bf72c_1_--_--_VOICEpnghigh.png?imwidth=1280)
The Sport programme provides sportier characteristics and allows higher engine speed for the gears. At the same time it responds more quickly to acceleration. During active driving, the use of a lower gear is prioritised, leading to a delayed upshift.
To activate Sport mode:
- Move the gear selector to the side from D position to the end position at "+S–" - the combined instrument panel changes indication from D to S.
Sport mode can be selected at any time while driving.
Geartronic - Winter mode
It can be easier to pull away on slippery roads if 3rd gear is engaged manually.
- Depress the brake pedal and move the gear selector from D position to the end position at "+/–" - the combined instrument panel shifts the indication from D to the figure 12.
- Scroll up to gear 3 by pushing the lever forward towards "+" (plus) twice - the combined instrument panel shifts the indication from 1 to 3.
- Release the brake and accelerate carefully.
The gearbox "winter mode" means that the car moves off with a lower engine speed and reduced engine power on the drive wheels.
Kick-down
When the accelerator pedal is pressed all the way to the floor (beyond the position normally regarded as full acceleration) a lower gear is immediately engaged. This is known as kick-down.
If the accelerator is released from the kick-down position, the gearbox automatically changes up.
Kick-down is used when maximum acceleration is needed, such as for overtaking.
Safety function
To prevent overrevving the engine, the gearbox control program has a protective downshift inhibitor which prevents the kick-down function.
Geartronic does not permit downshifting/kick-down which would result in an engine speed high enough to damage the engine. Nothing happens if the driver still tries to shift down in this way at high engine speed – the original gear remains engaged.
When kick-down is activated the car can change one or more gears at a time depending on engine speed. The car changes up when the engine reaches its maximum speed in order to prevent damage to the engine.
Towing
If the car has to be towed - see important information in the section Towing.