Use
- Pull the cover over the cargo and hook it into the holes in the rear cargo area pillars.
- To retract (roll up) the cover, release it from the holes and guide it toward the rear seat backrest.
Installing the cover
Press the end piece on one side of the cargo area cover into the retaining bracket in the side panel of the cargo area .
Do the same on the opposite side .
Press both sides of the cover until they click into place . The red mark will no longer be visible.
Check that both ends of the cover are securely locked in place.
Removing the cover
Press one of the end pieces of the cover inward.
Pull the cover carefully upward and outward. The other end will release automatically from its retaining bracket.
Folding down the cargo area cover's rear flap
The cargo area cover's rear flap points horizontally when the cover is retracted (rolled up). To fold it down:
Pull the flap slightly rearward past its supports and fold it down.
Note
On models equipped with this cover, it should be removed before a child seat is attached to the child restraint anchors.