Operating the driving lights
Familiarise yourself with operating the lights that are available via the left-hand steering wheel stalk.
You can control some primary lighting modes behaviours using the left-hand steering wheel stalk.
You can move the left-hand stalk forwards or backwards to switch between different lighting selections. The stalk always springs back to the neutral position.
The selections available are:
- Automatic high beam
- Manual high beam
- High beam flash
When the automatic lights mode is selected in the display, push the stalk twice to switch between the manual high beam and the automatic high beam.
Pull the stalk fully to turn high beam off and return to the automatic lights mode.
From the automatic lights mode, a short pull of the stalk activates the high beam flash.
The lights settings will reset to their default values between drives.
Important
Make sure that the car cameras are well-maintained and kept clean. If the cameras’ views are obscured by dirt, they will not be able to obtain enough information to properly direct the car’s lighting responses.