Disabling One pedal drive

Braking by using One pedal drive can be disabled or enabled in settings.

Using One pedal drive allows for regenerative braking by releasing the accelerator. When it's turned off, releasing the accelerator does not engage the brakes.

You can turn One pedal drive on or off in the display, either in settings or in quick controls.

 Tip

Automatic creeping

By turning One pedal drive off, you also enable automatic creeping. This means that your car can move slowly without you using the accelerator.

When automatic creeping is active you can temporarily pause it by pressing down hard on the brake pedal until your car is stopped. This activates auto hold. If you want to initiate creeping again, simply tap the accelerator.

 Warning

Keep the brake pedal in mind

There is a limit to the braking force that can be applied by releasing the accelerator when using One pedal drive. For hard braking you need to use the brake pedal.

Press the car symbol in the bottom bar and go to Settings.
Go to Driving → Driving dynamics → One pedal drive.
Turn One pedal drive on or off.