Find the car with the Volvo On Call* app

Updated 10/05/2022

In the Volvo On Call app, you can see the position of your car on a map. The map also shows your own position, i.e. the position of your mobile device. You can use the app to give commands to the car to sound the horn and/or flash the lights so that it is easier to find.

Find car with the Lights & Horn function

You can see your position and the position of the car in the Px-2037-VOC app icon Map tab. If you need to find the car in e.g. a large car park, you can use the following:

Lamps for flashing
Lights & Horn to both honk the horn and flash the lights

This activates the car’s horn and/or hazard warning lights for a couple of seconds. The function works within a radius of approximately 500 metres from the car1.

Limitations for finding car with the Volvo On Call app

If the Volvo On Call app does not show the car's exact position, it may be due to the following:

The present position of the car has poor or no GPS visibility, e.g. in an inside car park. In such cases, the latest position received is used as the approximate position.
The car could not transmit data to Volvo On Call's servers when you last parked it. The position is sent to your Volvo every time you park your car. If the car has no mobile coverage then the latest position has not been registered - so it is not visible in the app either. This can occur if the car is parked in e.g. a garage with poor mobile coverage.
Volvo On Call uses GPS technology to locate the car. The GPS coordinates are translated into addresses which are easy to understand, e.g. street names, which is why it might look like your car is parked on a street in the local area if, for example, it is parked in a nearby parking garage without GPS coverage.
The car's position is not shown when the car is not in use.
If the car shows incorrect position on the map, a simpler calibration can take place by locking the car and remaining stationary for 15-30 seconds. If this does not help, visit an authorised Volvo workshop to have the antenna unit checked/calibrated.