Map download for Sensus Navigation

MapCare™ is a map update service for Volvo cars equipped with Sensus Navigation. Maps are updated in two steps. First, the map is downloaded to a USB memory and then the map is loaded from the USB memory to the car.

The information in this article varies depending on car model and model year, so be sure to read the section that applies to your car.

Preparations

The map must be downloaded to an empty USB memory (32GB) with FAT32 formatting. If you do not have a USB memory to hand, you can download the map to another location. You then need to copy all the files to an empty USB memory later on.

Map download program

Map downloads are carried out using a program that is installed on your computer. This program helps you to download the large map file and allows you to interrupt the download and resume it later.

Perform the map update

Click on the Downloads tab at the top right of this page. Then click on Maps and select your navigation system. Click on the update you want to carry out and then follow the instructions below.

 Note

Please note the following:

  • The time it takes to transfer from the USB memory to the car varies depending on the size of the map data. The update can be performed while driving. The navigation system can be used to update a map region, but to update a whole map market, e.g. the EU, the navigation system cannot be used during the update. If installation is not finished when the car is switched off then the update continues when next driving.
  • The map update is paused if the Infotainment system is switched off or if the USB memory is removed before the update is complete. The update is resumed automatically when the system is switched back on or when the USB memory is reinserted.
  • Please wait a moment before switching off the car and pulling out the USB memory stick after the transfer is complete. This is to ensure that the map has been installed correctly.
  • If you find that a map has not been installed correctly, you can try to first install a smaller map from another country (e.g. Israel) and then reinstall the required map.
  • If you want to update your navigation system with a different map to the one already in the system, contact your Volvo dealer to check that this is possible.

Instructions

Depending on which system you have, select the download link for either Windows or Mac.
Select "Run" to install the map download program.
Click on "New download" to download the map to a USB memory or to the computer's hard disk drive.
You can verify that the download/copying to the USB memory stick has worked correctly before you install the map in the car by repeating steps 1-2 and then pressing on "Check download" in the download program.
Take the USB memory with the downloaded map on to your car and switch on the infotainment system.

Insert the USB memory in the USB port.

P3/P4 - Support site - MapUpdate - USB
The position of this port may vary depending on the car model.
The map update is initiated automatically. The infotainment system notifies you of the time for the update and asks you to confirm that you want to continue.

Press OK/MENU. The map update begins and a ”progress bar” is shown.

P3/P4 - Support site - Map update ongoing
Map update in progress.
Remove the USB memory when the update is complete.

If there are any problems with the map update, contact your customer support or Volvo dealer.

 Note

During the download, it is not advisable to use the mobile connection via mobile devices/phones, or in situations where the subscription used may have a monthly download limit for the amount of GB.

Applicable models

S60, model year 2014-2018

S80, model year 2015-2016

V40, model year 2015-2019

V60, model year 2014-2018

V70, model year 2015-2016

XC60, model year 2014-2018

XC70, model year 2015-2016

The car needs to be equipped with Sensus Connect and Sensus Navigation.

The range of models, systems and services may vary depending on market.

Preparations

The map must be downloaded to an empty USB memory (64GB) in one of the following formats: FAT32, NTFS or exFAT. The capacity of the USB memory required depends on map size, see detailed information for each map.

Download program

Map downloads are carried out using a program that is installed on your computer. This program helps you to download the map files and allows you to interrupt the download and resume it later.

Perform the map update

Click on the Downloads tab at the top right of this page. Then click on Maps and select your navigation system. Click on the update you want to carry out and then follow the instructions below.

 Note

Please note the following:

  • The time it takes to transfer from the USB memory to the car varies depending on the size of the map data. The update can be performed while driving. The navigation system can be used to update a map region, but to update a whole map market, e.g. the EU, the navigation system cannot be used during the update. If installation is not finished when the car is switched off then the update continues when next driving.
  • The map update is paused if the Infotainment system is switched off or if the USB memory is removed before the update is complete. The update is resumed automatically when the system is switched back on or when the USB memory is reinserted.
  • Please wait a moment before switching off the car and pulling out the USB memory stick after the transfer is complete. This is to ensure that the map has been installed correctly.
  • If you find that a map has not been installed correctly, you can try to first install a smaller map from another country (e.g. Israel) and then reinstall the required map.
  • If you want to update your navigation system with a different map to the one already in the system, contact your Volvo dealer to check that this is possible.

Instructions

Depending on which system you have, select the download link for either Windows or Mac.
Select "Run" to install the download program.
Click on "New download" to download the map to a USB memory or to the computer's hard disk drive.
You can verify that the download/copying to the USB memory stick has worked correctly before you install the map in the car by repeating steps 1-2 and then pressing on "Check download" in the download program.
Take the USB memory with the downloaded map to your car and switch on the navigation system.

Insert the USB memory in the USB port. If there are two USB inputs the second one must not be used at the same time.

17w38 - P5 - Support site - USB contact
The position of this port may vary depending on the car model.
The navigation system automatically detects that an update is available and during the update the screen shows how much of the process remains, counted as a percentage.

 Note

For the installation to start, the following criteria must be met:

  • Selected area is included on the system's map. It is only possible to download the Scandinavia area if the system already has a Europe map. If you download a whole new map then the previous map is overwritten.
  • The version for the selected area is later than the one in the car.
  • Selected area is compatible with the car's software. If the update is not compatible then new software will need to be downloaded.
  • Selected area is compatible with the existing map. If the area is not compatible then the map will need to be replaced.
When switching to a different map, press Confirm to approve the change of map. To cancel, press Cancel.
When the installation is complete a notification is shown advising that the updated map is available after the next restart. The USB memory can now be removed.

If there are any problems with the map update, contact your customer support or Volvo dealer.

 Note

During the download, it is not advisable to use the mobile connection via mobile devices/phones, or in situations where the subscription used may have a monthly download limit for the amount of GB.

Applicable models

S60, S60 Twin Engine/Recharge, model year 2019-2022

S90, model year 2017-2021

S90 Twin Engine/Recharge, model year 2018-2021

V60, V60 Cross Country, V60 Twin Engine/Recharge, model year 2019-2022

V90 Twin Engine/Recharge, model year 2018-2021

V90, V90 Cross Country, model year 2017-2021

XC40, model year 2018-2024

XC40 Twin Engine/Recharge (plug-in hybrid), model year 2020-2024

XC60, XC60 Twin Engine/Recharge, model year 2018-2021

XC90, XC90 Twin Engine/Recharge, model year 2016-2022

The car needs to be equipped with Sensus Navigation.

The range of models, systems and services may vary depending on market.

Related documents