
파일럿 보조 시스템(Pilot Assist)을 작동시키려면 다음과 같은 사항이 요구됩니다.
- 운전석 안전벨트를 채워야 하고 운전석 도어를 닫아야 합니다.
- 차선 표시가 선명해야 하며 차량이 감지할 수 있어야 합니다.
- 차량 전방 적절한 거리 내에 차량("목표 차량")이 있거나 현재 속도가 15 km/h (9 mph) 이상이어야 합니다.
- 속도는 140 km/h (87 mph)를 넘지 않아야 합니다.
- 운전자가 스티어링휠을 잡고 있어야 합니다.
- 차량 전방 적절한 거리 내에 차량("목표 차량")이 있거나 현재 속도가 15 km/h (9 mph) 이상이어야 합니다.
- 수동 변속기 장착 차량의 경우. 속도가 30 km/h (20 mph) 이상이어야 합니다.
◀ (1) 또는 ▶ (3)을 눌러 파일럿 보조 시스템(Pilot Assist)의 심벌
(4)로 이동합니다.

심벌이 회색 – Pilot Assist는 대기 모드에 있습니다.
Pilot Assist를 선택할 경우 – 스티어링휠 버튼
(2)을 눌러 켭니다.

심벌이 흰색 – Pilot Assist가 기동하고 현재 속도가 최고 속도로 저장됩니다.
Pilot Assist를 마지막 저장 속도로 다시 켜기
Pilot Assist를 선택할 경우 – 스티어링휠 버튼
을 눌러 켭니다.

운전자 화면의 크루즈 컨트롤 표시와 심벌이 회색에서 백색으로 변경됩니다. 차량은 이제 다시 최근에 저장된 속도를 따릅니다.
경고
