Jack*
A jack is used to raise the car, e.g. when changing the tyres.
The original jack should only be used for changing to the spare wheel. The jack's thread must always be well greased.
Tools - returning into place
After use, crank the jack together and screw apart the towing eye and wheel bolt wrench. Place the wheel bolt wrench and the jack in their respective compartments in the bag. Tighten the bag's centre strap firmly and use the other strap to secure the bag in the rear load retaining eyelet on the left-hand side of the cargo area. Position the bag so it is not pinched when the tailgate is closed. The white arrow on the bag must point toward the front of the car. Refit the towing eye in the foam block on the left-hand side of the cargo area.
Warning
The bag should be secured so that the white arrow (see the inset figure) points forward in the car.
Note
If the floor hatch in the cargo area floor is not closed then privacy locking does not work.