The trip computer's menu is in a variable loop. One of the alternatives is that the trip computer's three displays extinguish - this also marks the start/end of the loop.
OK - Opens the loop with the trip computer's functions + Activates the selected option.
Thumbwheel - Opens the loop with the trip computer's headings + Scrolls through the options.
RESET - Undoes, zeroes or backs out of a function after making a selection.
Functions
Proceed as follows to open and check/adjust functions:
- To ensure that no control is in the middle of a sequence - "Reset" them first with two presses on RESET.
- Press OK - loop with all functions opens.
- Browse through the functions with the thumbwheel and select/confirm with OK.
- Finish by pressing twice on RESET after completed checking/adjustment.
The different functions of the trip computer are listed in the following table:
| Functions | Information |
|---|---|
| Note that this function does not reset both trip meters T1 and T2 - see table under next section "Headings" and section "Resetting - Average speed/consumption" for information on the process. |
| For more information, see Messages - handling. | |
| The appearance of the combined instrument panel is selected here. | |
Select Auto On or Off. For more information, see General information about heaters. | |
| Adjusting the combined instrument panel's brightness and colour intensity. | |
| For a description of programming the timer, see Timer - setting. |
| Shows the number of months and mileage to next service. | |
| For more information, see Engine oil - checking and filling. |
Headings
One of the heading combinations in the following table can be selected for constant display in the combined instrument panel. Proceed as follows to determine which:
- To ensure that no control is in the middle of a sequence - "Reset" them first with two presses on RESET.
- Turn the thumbwheel - selectable heading combinations are shown in a loop.
- Stop on desired heading combination.
| Heading combinations | Information | ||
|---|---|---|---|
| Battery status | Trip meter T1 + Meter reading | Distance to empty battery |
|
| Average | Trip meter T1 + Meter reading | Average speed |
|
| Instantaneous | Trip meter T2 + Meter reading | Distance to empty tank |
|
| Instantaneous | Meter reading | kmh<>mph | kmh<>mph - see section "Digital speed display". |
| No trip computer information. | This option extinguishes all three trip computer displays - it also marks the beginning/end of the loop. | ||
The combined instrument panel's heading combination for the trip computer can be changed to another option at any time during the journey. Proceed as follows:
- Turn the thumbwheel - stop on the desired heading.
Resetting - Trip meter
Turn with the thumbwheel to the heading combination containing the trip meter to be reset:
- Give a long press on RESET - selected trip meter is zeroed.
Resetting - Average speed/consumption
| 1. | Select function Trip computer reset and activate with OK. |
| 2. | Select one of the following options with the thumbwheel and activate with OK: |
- l/100 km
- km/h
- Reset both
| 3. | Finish with RESET. |