Cruise control* temporary deactivation and standby mode

The cruise control (CC – Cruise Control) helps the driver to maintain an even speed.

The function can be temporarily deactivated and set in standby mode.

P4-1420-Farthållare Rattknappar u LIM
Steering wheel keypad and combined instrument panel.
  1. Ikon röd cirkel 1Cruise control - On/Off.
  2. Ikon röd cirkel 2Standby mode ceases and the stored speed is resumed.
  3. Ikon röd cirkel 3 Standby mode
  4. Ikon röd cirkel 4Activate and adjust the speed.
  5. Ikon röd cirkel 5Selected speed (GREY = Standby mode).
  6. Ikon röd cirkel 6Cruise control active - WHITE symbol (GREY = Standby mode).

Temporary deactivation - standby mode

To temporarily disengage cruise control and set it in standby mode:
  • Press the steering wheel button Ikon avaktivering farthållare.
>The combined instrument panel's marking (5) and symbol (6) change colour from WHITE to GREY - cruise control is temporarily disengaged.

Standby mode due to driver intervention

Cruise control is temporarily disengaged and automatically set in standby mode if:
  • the foot brake is used
  • the clutch pedal is depressed for longer than 1 minute1
  • the gear lever/selector is moved to N position
  • the driver maintains speed higher than the stored speed for longer than 1 minute.

The driver must then regulate the speed.

A temporary increase in speed with the accelerator pedal, e.g. during overtaking, does not affect the setting - the car returns to the last stored speed when the accelerator pedal is released.

Automatic standby mode

Cruise control is temporarily disengaged and set in standby mode if:
  • wheels lose traction
  • engine speed is too low/high
  • speed falls below 30 km/h (20 mph).

The driver must then regulate the speed.

  1. * Option/accessory.
  2. 1 Disengaging and selecting a higher or lower gear does not involve standby mode.