Seats, rear

Updated 08/06/2023

The rear seat backrest and the outer seat head restraints can be folded. The centre seat head restraint can be adjusted to suit the height of the passenger.

Head restraint, centre seat, rear

P3 V60 To adjust center head restraint in rear seat

Adjust the head restraint according to passenger height so that the whole of the back of the head is covered if possible. Slide it up as required.

To lower the head restraint again, the button (located in the centre between the backrest and head restraint, see illustration) must be pressed in while the head restraint is pressed down carefully.

Manual lowering of the outer head restraints, rear seat

P3-V60 V60H Manually folding the rear head restraint

Pull the locking handle closest to the head restraint to fold the head restraint forward.

The head restraint is moved back manually until a "click" can be heard.

Warning

The head restraints must be in locked position after being raised.

Lowering the rear seat backrest

Important

There must be no objects on the rear seat when the backrest is to be folded down. The seat belts must not be connected either. Otherwise there is a risk of damaging the rear seat upholstery.

The triple-section backrest can be folded in different ways.

Note

The front seats may need to be pushed forwards, and/or the backrests adjusted upwards, in order that the rear backrests can be folded forward fully.

The left-hand section can be folded separately.
The centre section can be folded separately.
The right-hand section can only be folded together with the centre section.
If the entire backrest is to be folded then the different sections should be folded separately.

P3-XC60 V60H Adjusting center head restraint

P3-XC60 V60H Folding outer head restraint

If the centre backrest is being lowered - release and adjust the head restraint for the centre backrest, see the earlier section "Head restraint, centre seat, rear".

The outer head restraints are lowered automatically when the outer backrests are lowered. Pull up the backrest's locking handle Ikon grå fyrkant A while folding the backrest forward at the same time. A red indicator on the lock catch Ikon grå fyrkant B shows that the backrest is no longer locked in place.

Note

When the backrests have been lowered the head restraints must be moved forward slightly so as not to make contact with the seat cushion.

Raising takes place in reverse order.

Note

When the backrest has been raised, the red indicator should no longer be showing. If it is still showing then the backrest is not locked in place.

Warning

Check that the backrests and head restraints in the rear seat are locked properly after being folded up.

Electrical lowering of the rear seat's outer head restraints*

P3-1246-V60/V60H/V70/XC70 Electrically folding the outer rear head restraints

The remote control key must be in key position II.

Press the button to lower the rear outer head restraints to improve rearward visibility.

Warning

Do not lower the outer head restraints if there are any passengers using of the outer seats.

Move the head restraint back manually until a click is heard.

Warning

The head restraints must be in locked position after being raised.