Connecting a phone to the car

Connect a phone to the car with Bluetooth to make calls, send and receive messages, and play back media.

Search phone from car

Activate Bluetooth in the phone and check in the settings that the phone is visible to other devices.
Go to settings iCup-2037-Settings symbol at the bottom of the centre display and then tap on Connectivity and Bluetooth. If the phone is not already listed1, select Pair new device.
Available Bluetooth devices are listed. The list is updated as new devices are detected.
Tap on the name of the phone to be connected.
Check that the numerical code shown in the car matches the code in the phone and, if so, confirm.
On the phone, choose to accept or reject any options for phone contacts and messages.
The phone is connected for both media and telephony as standard2.
Press Done.

 Note

  • The message function must be activated in certain phones.
  • If contacts and messages are not shown in the car despite activation of the function, disconnect the phone and then reconnect it.
  • Not all phones are fully compatible and may therefore not show contacts and messages in the car.

 Note

If the phone's operating system is updated then the connection may be broken. In which case, delete the phone from the car and then connect again.
  1. 1 The phones previously connected are directly visible under Bluetooth and can then be selected from there.
  2. 2 Later, it will be possible to choose which device should be used for telephony and/or media, such as if a passenger wants to use his/her phone as media device to play back music.