Regulating fan level for rear seat

Updated 17/11/2023

The fan can be set to several different automatically controlled fan speeds for the rear seat.

Regulating the fan level for the rear seat from the front seat

Open the climate view in the centre display by tapping on the temperature button at the bottom centre of the centre display.

Select the Rear tab.

Tap on the desired fan level; OFF, 1-5 or Max.

Third seat row fan level follows the level for the second seat row, but can be deactivated separately by tapping on Third row..

Fan level is changed and the buttons for the selected level illuminate.

Regulating the fan level for the rear seat from the rear seat

Press the unlocking button on the tunnel console climate panel to access the controls.

P5-1717–Climate–Rear climate controls fan — Fan controls on the climate panel at the rear of the tunnel console.

Tap on the desired fan level, 1-5.

Fan level is changed and the buttons for the selected level illuminate.

Note

The fan level for the rear seat cannot be set if the fan level for the front seat is not running.

The fan level for the rear seat is limited, depending on the fan level mode for the front seat, in order to reduce the noise level.

The rear seat fan speed can only be switched off from the climate view in the centre display.

Note

The climate control system automatically adjusts the air flow within the selected fan level based on requirements. This means that the fan speed may change even though the fan level is the same.

High fan level in the rear seat may cause increased sound volume in the front seat.