Enabling auto hold
You can enable or disable auto hold with the auto hold button in the tunnel console.
Auto hold automatically applies braking after you've come to a stop. You can enable or disable auto hold by pressing the auto hold button in the tunnel console.
Press the auto hold button in the tunnel console.
Auto hold is enabled and the symbol 
is illuminated on the auto hold button.
is illuminated on the auto hold button.Note
Disabling auto hold
You can disable auto hold in the same away as enabled it. Just press the auto hold button in the tunnel console. The auto hold symbol on the button will no longer be illuminated after disabling the feature.
If auto hold is active and currently holding your car stationary, you must press the brake pedal and the auto hold button simultaneously to be able to disable the feature.
After disabling auto hold, some brake assistance is still available at a standstill, such as roll-back prevention when starting the car on an uphill incline.