BLIS*

Updated 08/06/2023

BLIS (Blind Spot Information) is a function designed for providing support for the driver when driving in dense traffic on roads with several lanes in the same direction.

BLIS (Blind Spot Information) is a camera-based information system that under certain conditions can help the driver to notice vehicles moving in the same direction as the host vehicle in the so-called "blind spot".

BLIS is a driver's aid intended to provide a warning about:

vehicles in the car's blind spot
rapidly approaching vehicles in the left and right-hand lanes closest to the car.

The BLIS function CTA (Cross Traffic Alert) is a driver's aid intended to provide a warning about:

crossing traffic when the car is reversed.

Warning

BLIS is a supplementary aid and does not work in all situations.

BLIS is no substitute for a safe driving style and the use of rearview and door mirrors.

BLIS can never replace the driver's responsibility and attention - it is always the driver's responsibility to change lanes in a safe manner.

Overview

P4-1220-BLIS Mirror — BLIS lamp location1.

Ikon röd cirkel 1 — BLIS lamp location1.

Note

The lamp illuminates on the side of the car where the system has detected the vehicle. If the car is overtaken on both sides at the same time then both lamps illuminate.

Maintenance

The sensors for the BLIS functions are located inside the rear wing/bumper on each corner of the car.

P3-1420-s60 CrossTrafficAlert sensor — Keep this surface clean - also on the left-hand side.

To ensure optimal functionality the areas in front of the sensors must be kept clean.