Cruise control* temporary deactivation and standby mode

The cruise control (CC – Cruise Control) helps the driver to maintain an even speed. The function can be temporarily deactivated and set in standby mode.
P4-1220-Farthållare Rattknappar u LIM
The steering wheel buttons and combined instrument panel in cars without speed limiter1.
P4-1220-Farthållare Rattknappar m LIM
The steering wheel buttons and combined instrument panel in cars with speed limiter1.
  1. Ikon röd cirkel 1Cruise control - On/Off.
  2. Ikon röd cirkel 2Standby mode ceases and the stored speed is resumed.
  3. Ikon röd cirkel 3 Standby mode
  4. Ikon röd cirkel 4Activate and adjust the speed.
  5. Ikon röd cirkel 5Selected speed (GREY = Standby mode).
  6. Ikon röd cirkel 6Cruise control active - WHITE symbol (GREY = Standby mode).

Temporary deactivation - standby mode

To temporarily disengage cruise control and set it in standby mode:

  • Press the steering wheel button Ikon avaktivering farthållare.
>The combined instrument panel's marking (5) and the symbol (6) change colour from WHITE to GREY.

Automatic standby mode

Cruise control is temporarily disengaged and set in standby mode if:

  • wheels lose traction
  • the foot brake is used
  • speed falls below approx. 30 km/h
  • the clutch pedal is held depressed for a short time - however, a few seconds does not activate standby mode2
  • the gear selector is moved to neutral position (automatic gearbox)
  • the driver maintains a speed higher than the set speed for longer than 1 minute.

The driver must then regulate the speed.

  1. *Option/accessory.
  2. 1A Volvo dealer has updated information about what applies in each respective market.
  3. 2Cars with 4-cyl 2.0L engine also allow gear changing.