Cruise control* temporary deactivation and standby mode

Updated 08/06/2023

The cruise control (CC – Cruise Control) helps the driver to maintain an even speed.

The function can be temporarily deactivated and set in standby mode.

P4-1420-Farthållare Rattknappar u LIM — The steering wheel buttons and combined instrument panel in cars **without** speed limiter1.

P4-1220-Farthållare Rattknappar m LIM — The steering wheel buttons and combined instrument panel in cars **with** speed limiter1.

Ikon röd cirkel 1 — The steering wheel buttons and combined instrument panel in cars **with** speed limiter1.

Temporary deactivation - standby mode

To temporarily disengage cruise control and set it in standby mode:

Press the steering wheel button .

>	The combined instrument panel's marking (5) and symbol (6) change colour from WHITE to GREY - cruise control is temporarily disengaged.

Standby mode due to driver intervention

Cruise control is temporarily disengaged and automatically set in standby mode if:

the foot brake is used
the clutch pedal is depressed for longer than 1 minute2
the gear lever/selector is moved to N position
the driver maintains speed higher than the stored speed for longer than 1 minute.

The driver must then regulate the speed.

A temporary increase in speed with the accelerator pedal, e.g. during overtaking, does not affect the setting - the car returns to the last stored speed when the accelerator pedal is released.

Automatic standby mode

Cruise control is temporarily disengaged and set in standby mode if:

wheels lose traction
engine speed is too low/high
speed falls below approx. 30 km/h.

The driver must then regulate the speed.