Seats, rear

The rear seat backrest and the outer seat head restraints can be folded. The centre seat head restraint can be adjusted to suit the height of the passenger.

Lowering the rear seat backrest

 Important

There must be no objects on the rear seat when the backrest is to be folded down. The seat belts must not be connected either. Otherwise there is a risk of damaging the rear seat upholstery.
P3-1320-S80- fällning ryggstöd baksäte

The backrest is in two parts. The parts can be folded forward, together or separately.

Pull the handle/handles.
Fold the backrest forward. Lower the centre head restraint fully if the backrest's wide section shall be lowered.

 Warning

Take hold of the backrests and make sure they are locked properly after opening them out in order to prevent injury under hard braking or in the event of an accident.

Head restraint, centre seat, rear

P3-1320-S80+S80L Rear center head restraint, adjusting height

The head restraint can be adjusted vertically to suit the height of the passenger. The upper edge of the head restraint should be aligned with middle of the back of the head. Slide it up as required.

To lower the head restraint again, the button by the left-hand shaft must be pressed in while the head restraint is pressed down carefully.

Electrical lowering of the rear seat's outer head restraints*

P3-1246-S60/S80 Electrically folding the outer rear head restraints
The remote control key must be in key position II.
Press the button to lower the rear outer head restraints to improve rearward visibility.

 Warning

Do not lower the outer head restraints if there are any passengers using of the outer seats.

Move the head restraint back manually until a click is heard.

 Warning

The head restraints must be in locked position after being raised.
  1. * Option/accessory.