Radio stations as presets

Updated 08/06/2023

Frequently used radio stations are optimally saved as presets in order to facilitate simple activation.

P3-1246-DOM-Radiostationer som förval — Station presets.

AM1/FM radio

10 presets can be stored per wavelength (e.g. AM).

The stored presets are selected using the preset buttons.

Tune into a station, see Radio tuning.

Hold one of the preset buttons depressed for a few seconds. The preset button can now be used.

A list of pre-selected channels can be shown in the display screen.

Activate/deactivate in AM-/FM mode under AM menu → Show → Presets alternatively FM menu → Show → Presets.

Digital radio (DAB)*

10 presets can be stored per wavelength. Storage of presets is performed by means of a long press on the desired preset button, for more information see AM/FM radio above. The stored presets are selected using the preset buttons.

A preset contains one channel but no subchannels. If a subchannel is being played and a preset is saved then only the main channel is registered. This is because subchannels are temporary. At the next attempt to retrieve the preset, the channel which contained the subchannel will be played. The preset is not dependent on the channel list.

A list of pre-selected channels can be shown in the display screen.

Activate/deactivate in DAB mode under DAB menu → Show → Presets.

Note

The audio system's DAB system does not support all functions in the DAB standard.