Radio stations as presets

Frequently used radio stations are optimally saved as presets in order to facilitate simple activation.
P3-1246-DOM-Radiostationer som förval
Station presets.

AM1/FM radio

10 presets can be stored per wavelength (e.g. AM).

The stored presets are selected using the preset buttons.

Tune into a station, see Radio tuning.
Hold one of the preset buttons depressed for a few seconds. The preset button can now be used.

A list of pre-selected channels can be shown in the display screen.

To activate/deactivate, in the normal view for the AM/FM source, press OK/MENU and select Show → Presets.

Digital radio (DAB)*

10 presets can be stored per wavelength. Storage of presets is performed by means of a long press on the desired preset button, for more information see AM/FM radio above. The stored presets are selected using the preset buttons.

A preset contains one channel but no subchannels. If a subchannel is being played and a preset is saved then only the main channel is registered. This is because subchannels are temporary. At the next attempt to retrieve the preset, the channel which contained the subchannel will be played. The preset is not dependent on the channel list.

A list of pre-selected channels can be shown in the display screen.

To activate/deactivate, in the normal view for the DAB source, press OK/MENU and select Show → Presets.

 Note

The audio system's DAB system does not support all functions in the DAB standard.
  1. 1 Does not apply to the V60 Twin Engine and S60L Twin Engine.
  2. * Option/accessory.