Connecting a phone to the car via Bluetooth for the first time

Connect a phone with Bluetooth activated to then be able to make calls from the car, send/receive messages, play back media wirelessly and connect the car to the Internet.

It is possible to have two Bluetooth devices connected at once, in which case one of them can only play back wirelessly. The most recently connected phone will automatically be connected to make calls, send/receive messages, play back media and provide an Internet connection1. It is possible to change what the phone is to be used for under Bluetooth Devices via the settings menu in the centre display's top view. Your mobile phone needs to be equipped with Bluetooth and support tethering.

After the device has been connected/registered a first time via Bluetooth, it no longer needs to be visible/discoverable, but only have Bluetooth activated. A maximum of 20 connected Bluetooth devices can be stored in the car.

If you have a new device and it has the same name as one you have previously connected to the car, you may first have to delete the old device from the car's list of previously connected devices. After that, the new device is connected as normal.

There are two options for connecting. Either search the phone from the car or search the car from the phone.

Option 1 - search phone from car

Make the phone searchable/visible via Bluetooth.

Open the phone tile in the centre display.

  • If there is no phone connected to the car, tap on Add phone.
  • If there is a phone connected to the car, tap on ChangeP5–1617–Change phone symbol. In the pop-up window, tap on Add phone.
Available Bluetooth devices are listed. The list is updated as new devices are detected.
Tap on the name of the phone to be connected.
Check that the specified number code in the car matches that in the phone. In which case, choose to accept in both places.
On the phone, choose to accept or reject any options for phone contacts and messages.

 Note

  • The message function must be activated in certain phones.
  • Not all phones are fully compatible and may therefore not show contacts and messages in the car.

Option 2 - search car from phone

Open the phone tile in the centre display.

  • If there is no phone connected to the car, tap on Add phone → Make car discoverable.
  • If there is a phone connected to the car, tap on ChangeP5–1617–Change phone symbol. In the pop-up window, tap on Add phone → Make car discoverable.
Activate Bluetooth on the phone.
Search on the phone for Bluetooth devices.
Available Bluetooth devices are listed.
Select the name of the car on the phone.
A pop-up window for the connection is shown in the car. Confirm the connection.
Check that the specified number code in the car matches the one shown in the external device. In which case, choose to accept in both places.
On the phone, choose to accept or reject any options for phone contacts and messages.

 Note

  • The message function must be activated in certain phones.
  • Not all phones are fully compatible and may therefore not show contacts and messages in the car.

 Note

If the phone's operating system is updated then the connection may be broken. In which case, delete the phone from the car and then connect again.
  1. 1 You can also adjust manually under the settings.