Adjusting the settings for shock absorption Polestar Engineered*
Location of adjuster knobs
There are four adjuster knobs, two for the front shock absorbers and two for the rear. The adjuster knobs are located above each wheel. For the front wheels, the adjuster knobs are located under the bonnet. For the rear wheels, the adjuster knobs are located above each wheel in the wheel housing.
Note
Adjusting the setting for shock absorption, front
Make sure that the adjuster knob is set to 0 position before starting the adjustment. This way it is easier to know which adjustment position is set.
Turn the control clockwise until it has stopped in order to access adjustment position 0.
Turn the control anticlockwise to select the desired adjustment position. Adjustment positions are defined with an audible and noticeable click.
Adjusting the setting for shock absorption, rear
The rear adjuster knobs are located above the tyre inside the wheel housing. The car must be raised on a jack to access the rear adjuster knobs, see separate section.
Remove the protective rubber cover that covers the adjuster knob.
Turn the control clockwise until it has stopped in order to access adjustment position 0.
Turn the adjuster knob anticlockwise to select the desired adjustment position. Adjustment positions are defined with an audible and noticeable click.
Note
Recommended positions
| Position | Front | Rear |
| Performance position | adjustment position 4 | adjustment position 4 |
| Dynamic position | adjustment position 10 | adjustment position 10 |
| Comfort position | adjustment position 15 | adjustment position 15 |