Panorama roof* - operation

The blind/roof is opened to maximum during automatic operation.

In ventilation position the front section of the roof is raised at the rear.

Operating

 Warning

Children, other passengers or objects may be trapped by the panorama roof's moving parts.

  • Always operate the panorama roof with caution.
  • Do not allow children to play with the controls.
  • Remember to always switch off the power supply to the panorama roof by selecting key position 0 and then take the remote control key/PCC* with you when leaving the car. For information on key positions - see Key positions - functions at different levels.
P3-0835 XC60 Sliding panorama roof
  1. Ikon röd pil 1Opening, automatic
  2. Ikon röd pil 2Opening, manual
  3. Ikon röd pil 3Closing, manual
  4. Ikon röd pil 4Closing, automatic

The panorama roof and curtain can be operated in key position I or II.

Automatic operation

To open the curtain all the way - press the control rearward to the automatic opening position and release.
To then open the panorama roof all the way - press the control rearward again to the automatic opening position and release.

Close the roof/curtain by repeating the preceding procedure in reverse order - press the control forward to the automatic closing position instead.

Rapid opening/closing

The panorama roof and curtain can be opened/closed simultaneously:

  • To open - press the control rearward to the automatic operation position twice and release.
  • To close - press the control forward to the automatic operation position twice and release.

Manual operation

To open the curtain - press the control rearward to the point of resistance for manual opening. The curtain moves towards maximum opening as long as the button is depressed.
To angle the panorama roof - press the control rearward again to the point of resistance for manual opening
To open the panorama roof - press the control rearward to the point of resistance for manual opening a third time. The panorama roof moves towards maximum opening as long as the button is kept depressed.

Close the roof/curtain by repeating the preceding procedure in reverse order - press the control forward to the manual closing position instead.

 Note

For manual opening, the curtain must be fully open before the panorama roof can be opened. For the reverse procedure, the panorama roof must be fully closed before the curtain can be closed.

Ventilation position

P3-0835 XC60 Sliding panorama roof, tilt position
Ventilation position, vertically at the rear edge.
  1. Ikon röd pil 1Open by pressing the rear edge of the control upward.
  2. Ikon röd pil 2Close by pulling the rear edge of the control down.

When the ventilation position is selected the front section is raised at its rear edge. If the curtain is fully closed when ventilation position is selected - then it opens automatically approx. 50 mm.

Closing using the remote control key or central locking button

P3-0835 XC60 Panorama roof from inside

One long press on the lock button, see Remote control key - functions and Locking/unlocking - from the inside, closes the panorama roof and all the windows. The door mirrors are retracted* and the doors and tailgate are locked. To interrupt closing, press the lock button again.

 Warning

If the panorama roof is closed with the remote control key, check that no one risks being trapped.

Pinch protection

The panorama roof has pinch protection that is triggered if the glass cover or the sun blind is blocked by an object during closing. In the event of blocking, the glass cover or sun blind is then opened automatically to approx. 50 mm from the blocked position (or to full ventilation position). The pinch protection is also active when the glass cover or sun blind is opened.

There is the option to force the pinch protection when closing has been interrupted e.g. in the event of ice forming around the glass cover, by continually holding the control pressed forward or depressed until the glass cover is closed.

  1. * Option/accessory.