Replacing the dipped beam bulb
The dipped beam bulb in the halogen headlamp can be replaced without assistance from a workshop.
Important
Never touch the glass part of the bulbs with your fingers. Grease from your fingers is vaporised by the heat, coating the reflector and then causing damage.
![P5-1507 Low beam bulb replacement](https://www.volvocars.com/images/support/imgbcb6b98b6faa7063c0a801524a7f040b_1_--_--_VOICEpnghigh.png?imwidth=1280)
Detach the headlamp's round rubber cover.
Unplug the connector from the bulb.
Detach the bulb by pushing it gently upwards and pulling it straight out.
Fit a new bulb in the socket. The bulb's guide pin must be aimed straight upwards.
Press in the connector.
Refit the headlamp's round rubber cover.