Settings for route and road navigation

Updated 10/29/2020

Settings are selected here to define how the route is to be calculated and the road navigation presented in the navigation system*.

Adjust the volume by turning the volume knob while the voice is talking.

Settings → Navigation → Route and Guidance

Settings can be made within the following areas:

Arrival Time Format
Voice Guidance Level
Choose Default Route Type
Route Learning
Avoidance Settings
Suggest Petrol Station

Time format

Select how arrival time should be specified:

ETA1 (estimated time of arrival at destination)
RTA2 (remaining time to arrival)

The times shown apply to the time zone of the destination.

Level for voice guidance

Press Voice Guidance Level.

Tap on the voice guidance required:

None (no automatic voice guidance but the possibility of manually requesting current voice guidance once)
Low (only one message per guidance point)
Medium (up to 3 messages per guidance point, with limited information)
Full (up to 4 messages per guidance point and all available information)

Standard route types

Select the standard type of route preferred:

Fast
Eco
Scenic (motorways are avoided as far as possible, so the journey time may be long)

It is also possible to show an alternative route while driving continues.

Route learning

Select Route Learning if data collection to optimise route calculation should be permitted.

Avoid

Press Avoidance Settings to open a menu with different options that can be avoided automatically, if possible, when calculating route. For example, select tunnels, areas with congestion charge and ferries.

Suggestions for petrol stations

Press Suggest Petrol Station to activate or deactivate suggestions for nearby petrol stations in the driver display when the fuel level is low.