Using a stored position for seat, door mirrors and head-up display*
If the positions for the power* seat, the door mirrors and the head-up display* have been stored, they can be activated by using the memory buttons.
Using a stored setting
A stored setting can be used with the front door either open or closed:
Open front door
Depress one of the memory buttons 1 (
) or 2 (
) with a short press. Power seat, door mirrors and head-up display move and then stop at the positions stored in the selected memory button.
) or 2 () with a short press. Power seat, door mirrors and head-up display move and then stop at the positions stored in the selected memory button.Closed front door
Hold one of the memory buttons 1 () or 2 () depressed until seat, door mirrors and head-up display stop in the positions that are stored in the selected memory button.
) or 2 () depressed until seat, door mirrors and head-up display stop in the positions that are stored in the selected memory button.If the memory button is released, the movement of the seat, door mirrors and head-up display will be stopped.
Warning
- Because the driver's seat can be adjusted with the ignition off, children should never be left unattended in the vehicle.
- Movement of the seat can be STOPPED at any time by pressing any button on the power seat control panel.
- Do not adjust the seat while driving.
- Make sure there is nothing under the seats when they are being adjusted.