Home safe lighting
Home safe lighting consists of dipped beam, position lamps, lamps in the outside handles and number plate lighting.
Some of the exterior lighting can be kept switched on to work as home safe lighting after the car has been locked.
Remove the remote control key from the ignition switch.
Move the left-hand stalk switch toward the steering wheel to the end position and release it. The function can be activated in the same way as with main beam flash; see Main/dipped beam.
Get out of the car and lock the door.
When the function is activated, dipped beam, position lamps, lamps in the outside handles and number plate lighting are switched on.
The length of time for which the home safe lighting should be kept on can be set in the menu system MY CAR, see MY CAR.