Detailed information for child restraint manufacturers

The table provides detailed information for manufacturers of child restraint systems regarding which locations in the car are appropriate for different kinds of child restraints.
Seat position overview for left-hand drive
4
6
1
2
3
5
Seat position112 (with disabled airbag, only rearward-facing child restraints)22 (with enabled airbag, only forward-facing child restraints)23456
Seat position suitable for universal category restraints which are attached using the car's seatbelt (Yes/No)NoYes3Yes3YesYesYesYes
Seat position for i-Size (Yes/No)NoNoNoYesYesNoNo
Seat position lateral fixture (L1/L2/No)NoNoNoNoNoNoNo
Largest suitable rearward-facing fixture (R1/R2/R3/No)NoR3456NoR3R3NoNo
Largest suitable forward-facing fixture (F1/F2/F2x/F3/No)NoNoF3456F3F3NoNo
Largest suitable booster fixture (B2/B3/No)NoNoB37B37B37B3B3
  1. 1According to illustration.
  2. 2The seat cushion extension must always be retracted when installing child restraints.
  3. 3Adjust the backrest to a more upright position when necessary.
  4. 4Works for the installation of ISOFIX child restraints that are vehicle specific approved if the car is equipped with the ISOFIX console accessory (availability may vary between regions). Top tether anchorage points are not available for this seat.
  5. 5Adjust the backrest so that the seat headrest does not touch the child restraint.
  6. 6Do not fit support legs to any raised or uneven floor surfaces, footrests or other objects. Adjust seat position if necessary to avoid.
  7. 7Adjust belt height adjuster to its highest point.