To adjust lumbar support*, turn the wheel1.
Forward/backward: lift the handle to adjust the distance to the steering wheel and pedals. Check that the seat is locked after adjusting position.
To raise/lower the front edge of seat cushion*, pump up/down.
Adjust backrest rake, turn the wheel.
Raise/lower the seat*, pump up/down.
Control panel for power seat*, see Seats, front - electrically operated.
Warning
Adjust the position of the driver's seat before setting off, never while driving. Make sure that the seat is in locked position in order to avoid personal injury in the event of heavy braking or an accident.
Adjusting the front seat head restraints
Adjust the head restraint based on the person's height so that the whole of the back of the head is covered if possible.
To adjust the height, the button (see illustration) must be pressed while the restraint is moved up or down.
The head restraint can be adjusted in three different positions.
Lowering the passenger seat backrest*
The passenger seat backrest can be folded forward to make room for long loads.
Move the seat as far back/down as possible.
Adjust the backrest to an upright position.
Lift the catches on the rear of the backrest and fold it forward.
Push the seat forward so that the head restraint "locks" in under the glovebox.
Raising takes place in reverse order.
Warning
Do not use the seat behind the passenger seat, or the rear centre seat, when the passenger seat's backrest is lowered.
Warning
Grasp the backrest and make sure that it is properly locked after being folded up in order to avoid personal injury in the event of sudden braking or an accident.