Using the sun blind*
The sun blinds are built into each of the rear doors, and there is a sun blind built into the rear parcel shelf.
Rear door – electrically operated
Each of the sun blinds can be either fully retracted or fully extended.
The sun blinds are equipped with pinch protection, and in the event of a problem operating the sun blinds, a reset sequence can be tested.
Control for electrically operated sun blind
Controls: | Checks: |
---|---|
Driver's door | Right and left-hand rear doors |
Passenger door | None |
Left-hand rear door | Left-hand rear door |
Right-hand rear door | Right and left-hand rear doors |
In order for the power windows and sun blinds to be operated, the ignition position must be in position I or II.
If several of the controls are used at the same time then the function for the control used first is activated. Once the function has finished, the other controls can be used again.
Closing the window and rolling out the sun blind
The window must be fully closed before the sun blind can be rolled out.
Retracting the sun blind and opening the window
The sun blind must be retracted before the window can be opened.
Automatic operation - rapid opening/closing
The window and sun blind can be opened/closed simultaneously:
Rear window parcel shelf
There is an electrically operated sun blind built on the rear window shelf.
In order that the sun blind can be operated, the car's electrical system must be in ignition position II.
Note
Operating with the control in the right-hand rear door
Give a short press on the button - the sun blind is operated automatically to its end position, up or down.