![P5-1917-Activate and start Pilot Assist](https://www.volvocars.com/images/support/imgbafb096df9ddb694c0a801523f06fbb6_2_--_--_VOICEpnghigh.png?imwidth=1280)
Pilot Assist開始作用的必要條件。
- 駕駛人繫妥安全帶,且駕駛側車門關閉。
- 車道邊緣標線必須清晰,且能夠受到車輛偵測。
- 前方合理距離內必須有車(「目標車輛」),或目前車速不低於時速 15 公里(9 mph)。
- 車速不可超過時速140公里(87 mph)。
- 駕駛人必須保持雙手放在方向盤上。
- 前方合理距離內必須有車(「目標車輛」),或目前車速不低於時速 15 公里(9 mph)。
- 設有手排變速箱的車輛。速度必須為最低30 km/h (20 mph)。
按下◀ (1)或▶ (3)捲動到Pilot Assist
(4)的符號。
![P5-1917-Pilot Assist symbol](https://www.volvocars.com/images/support/img63235ebbfb6de0adc0a8015270155fa7_1_--_--_VOICEpnghigh.png?imwidth=1280)
符號為灰色 – Pilot Assist處於待機模式。
選取Pilot Assist時 - 按下方向盤按鈕
(2)以啟用。
![P5-1507-Cruise Control, speed limiter, activates speed limiter and stores current speed symbol 5x3,5](https://www.volvocars.com/images/support/imgc6e82222d4766c01c0a80152791aff8f_1_--_--_VOICEpnghigh.png?imwidth=1280)
符號為白色 – 啟動Pilot Assist,目前速度儲存為最大速度。
設為在最近儲存速度重新啟用Pilot Assist
選取Pilot Assist時 - 按下方向盤按鈕
以啟用。
![P5-1507-Cruise control, speed limiter, activates speed limiter from standby mode symbol 5x3,5](https://www.volvocars.com/images/support/imgc8449d8bd464c1aec0a80152384ebba2_2_--_--_VOICEpnghigh.png?imwidth=1280)
駕駛人顯示器的定速巡航控制標記和符號從灰色變為白色 — 車輛會再次跟隨最新儲存的速度。
警告
使用
方向盤按鈕恢復速度後,車速可能大幅提高。
![P5-1507-Cruise control, speed limiter, activates speed limiter from standby mode symbol 5x3,5](https://www.volvocars.com/images/support/imgc8449d8bd464c1aec0a80152384ebba2_2_--_--_VOICEpnghigh.png?imwidth=1280)