Using the wireless phone charger*

The rubber plate under the centre display makes it possible to charge phones without the need to use the phone's cable.

Activating and deactivating the wireless charger

The wireless charger is activated during factory setting. Sometimes, it can help to deactivate the charger, for example when you want to put your phone on the rubber panel without also charging it. To deactivate and activate it:
Go to settings iCup-2037-Settings symbol at the bottom of the centre display and then tap on Controls.
Adjust the controls next to Wireless phone charger.

Charging a unit with the wireless charger

P6-2222-Wireless phone charger
Wireless phone charger in front of gear lever

 Warning

Wireless charging may affect the operation of an implanted pacemaker or other medical devices. If you have one, it is recommended to consult with your doctor before using the wireless charging system.
Check that the charger is activated.
Remove all other objects from the charger.
Place the unit to be charged in the middle of the charger.
The unit starts to charge and the iCup-2037-Wireless phone charging symbol symbol is shown at the top of the centre display.

 Important

Avoid storing cards or other objects with NFC (Near Field Communication), e.g. bank cards for contactless payment, with the unit to be charged. It can damage these types of objects and interfere with the charging.

 Note

  • The charging process may vary depending on the type of unit to be charged. For example, the time before charging starts or before the unit is fully charged can vary.
  • Units may become hot during charging. This is normal.

If the phone does not charge:

  • Check in the centre display that the charger is activated.
  • Check that the charging plate is free from other objects.
  • Check that the phone supports wireless charging (Qi).
  • Remove the case from the phone if one is fitted.
  • Lift the phone and position it in the centre of the charging plate once again.
  • Check that the car is running.
  • Check that your phone has not slid off the charging pad while driving.
  • If battery temperature becomes too high during charging, the charging function is deactivated.
  • If any of the doors are opened, charging is interrupted for several seconds.

If objects prevent charging on the charging plate, a message is shown in the centre display.

 Important

Keep the phone and charging plate free of other objects while charging to avoid overheating.
  1. * Option/accessory.